GB 14773-2007 涂装作业安全规程 静电喷枪及其辅助装置安全技术条件
作者:标准资料网 时间:2024-05-22 07:36:26 浏览:8976
来源:标准资料网
基本信息
标准名称: | 涂装作业安全规程 静电喷枪及其辅助装置安全技术条件 |
英文名称: | Safety code for painting—Safety specification for electrostatic spray guns and associated apparatus |
中标分类: |
医药、卫生、劳动保护 >>
劳动安全技术 >>
生产设备安全技术 |
ICS分类: |
环保、保健与安全 >>
职业安全、工业卫生
|
替代情况: | 替代GB 14773-1993 |
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2007-07-30 |
实施日期: | 2008-02-01 |
首发日期: | 1993-12-21 |
作废日期: | |
主管部门: | 国家安全生产监督管理局 |
提出单位: | 国家安全生产监督管理总局 |
归口单位: | 全国安全生产标准化技术委员会涂装作业分技术委员会 |
起草单位: | 江苏省安全生产科学研究院、浙江明泉工业涂料有限公司 |
起草人: | 沈立、朱和平、金雪芳、邬克、黄立明、赵瑛、茅立安 |
出版社: | 中国标准出版社 |
出版日期: | 2008-02-01 |
页数: | 平装大16开 页数:8, 字数:10千字 |
计划单号: | 20010453-Q-450 |
适用范围
标准规定了在静电喷漆区和静电喷粉区使用的手持式或自动式静电喷枪及其辅助装置的安全技术条件,适用于各种手持式或自动式静电喷枪及其辅助装置的设计、制造、试验、检测、使用和维护,不适用于本质安全型静电喷枪。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 医药 卫生 劳动保护 劳动安全技术 生产设备安全技术 环保 保健与安全 职业安全 工业卫生
【英文标准名称】:CeramicPlumbingFixtures
【原文标准名称】:陶瓷管子附件
【标准号】:ASMEA112.19.2-2008
【标准状态】:现行
【国别】:美国
【发布日期】:2008
【实施或试行日期】:
【发布单位】:美国机械工程师协会(US-ASME)
【起草单位】:ASME
【标准类型】:()
【标准水平】:()
【中文主题词】:定义;液压装置;装置;工业瓷器;规格试验;卫生设施;卫生装置;规范(验收);小便池;抽水马桶;给水设施
【英文主题词】:Definition;Definitions;Hydraulics;Installations;Porcelain;Ratingtests;Sanitaryfacilities;Sanitaryinstallation;Specification(approval);Urinals;Waterclosets;Watersupplyinstallations
【摘要】:1.1ThisStandardcoversvitreousandnon-vitreouschinaplumbingfixturesandspecifiesrequirementsformaterials,construction,performance,testing,andmarkings.ThisStandard’sperformancerequirementsandtestproceduresapplytoalltypesofwaterclosetsandurinalsthatdischargeintogravitydrainagesystemsinpermanentbuildingsandstructures,independentofoccupancy.1.2ThisStandardcoversthefollowingplumbingfixtures:(a)bathtubs;(b)bidets;(c)drinkingfountains;(d)fixturesforinstitutionalapplications;(e)lavatories;(f)showerbases;(g)sinks:(i)laboratorysinks;(ii)laundrysinks;(iii)servicesinks;and(iv)utilitysinks;(h)urinals;and(i)waterclosets;1.3InthisStandard,“shall”isusedtoexpressarequirement,i.e.,aprovisionthattheuserisobligedtosatisfyinordertocomplywiththestandard;“should”isusedtoexpressarecommendationorthatwhichisadvisedbutnotrequired;“may”isusedtoexpressanoptionorthatwhichispermissiblewithinthelimitsofthestandard;and“can”isusedtoexpresspossibilityorcapability.Notesaccompanyingclausesdonotincluderequirementsoralternativerequirements;thepurposeofanoteaccompanyingaclauseistoseparatefromthetextexplanatoryorinformativematerial.Notestotablesandfiguresareconsideredpartofthetableorfigureandmaybewrittenasrequirements.Annexesaredesignatednormative(mandatory)orinformative(non-mandatory)todefinetheirapplication.1.4SIunitsaretheunitsofrecordinCanada.InthisStandard,theyard/poundunitsareshowninparentheses.Thevaluesstatedineachmeasurementsystemareequivalentinapplication;however,eachsystemistobeusedindependently.Combiningvaluesfromthetwomeasurementsystemscanresultinnon-conformancewiththisStandard.AllreferencestogallonsaretoU.S.gallons.ForinformationontheunitconversioncriteriausedinthisStandard,seeAnnexB.
【中国标准分类号】:Q81
【国际标准分类号】:91_140_70
【页数】:69P;A4
【正文语种】:英语
【英文标准名称】:Hexagonsocketheadcapscrewswithmetricfinepitchthread
【原文标准名称】:带公制精细节距螺纹的内六角螺钉
【标准号】:ISO12474-2010
【标准状态】:现行
【国别】:国际
【发布日期】:2010-10-01
【实施或试行日期】:2010-10-01
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC2
【标准类型】:()
【标准水平】:()
【中文主题词】:凸头螺钉;凸圆头紧固件;紧配合螺纹;交货条件;名称与符号;尺寸公差;尺寸规格;紧固件;六角凹头螺钉;六角内孔;ISO米制螺纹;ISO微型螺纹;ISO螺纹;机械连接;米制的;米制螺纹;产品等级;性能;螺钉;凹头紧固件;规范(验收);螺纹;重量
【英文主题词】:Cheeseheadscrews;Cheese-headfasteners;Close-fitthreads;Deliveryconditions;Designations;Dimensionaltolerances;Dimensions;Fasteners;Hexagonsocketscrews;Hexagonsockets;ISOmetricthreads;ISOminiaturescrewthreads;ISOscrewthreads;Mechanicallinkages;Metric;Metricscrewthreads;Productgrades;Properties;Screws(bolts);Socket-headfasteners;Specification(approval);Threads;Weights
【摘要】:ThisInternationalStandardspecifiesthecharacteristicsofhexagonsocketheadcapscrewswithmetricfinepitchthreadwithnominalthreaddiameters,d,from8mmupto36mmandproductgradeA.Forapproximatemassesofscrews,seeAnnexA.
【中国标准分类号】:J13
【国际标准分类号】:21_060_10
【页数】:16P.;A4
【正文语种】:英语